Fire Safety Equipment Built for Field Conditions
Purchase NOW: +1 (403)-815-9527
CALL NOW 
Price range: $11.00 through $14.00
The Fire Extinguisher Cover protects equipment from weather, UV exposure, and industrial contaminants that cause corrosion and inspection failures on construction sites,warehouses, fleets, and outdoor installations.
Standard covers are plastic bags that leave the bottom exposed, trap condensation, and crack after one season. Our weatherproof fire extinguisher cover uses patented copolymer that encapsulates the entire extinguisher from top to bottom, sealing out rain, snow,fly-ash, fertilizers, and industrial by-products while maintaining quick emergency access through the clear viewing window.
This UV resistant fire extinguisher cover works with any wall bracket or vehicle bracket you already have. Four sizes fit 5 lb, 10 lb, 20/30 lb, and K Class/Pressure Water extinguishers.
Most weatherproof fire extinguisher cover failures happen on vehicle mounts where road vibration and weather exposure combine, on construction sites where fly ash and cement dust coat everything, and in warehouses where fertilizers and agricultural by-products sit in the air year-round.
The AR Fire cover is built specifically for those conditions. On fleet vehicles, the full-enclosure design seals the cylinder from road spray and temperature swings that crack standard covers at the seams. As a construction site extinguisher cover, the copolymer resists the particulate contact that degrades vinyl covers within a single season. For warehouse fire extinguisher protection, the same material blocks fertilizer and oil contact that causes rust to start at the base before the annual service check catches it.
Each size is an OSHA compliant fire extinguisher cover with a clear viewing window that satisfies the visibility requirements inspectors check for under NFPA 10 extinguisher protection standards. The cover does not need to be removed for monthly gauge checks or tamper seal inspections.
Pricing varies by size. 10% off for 10+ units. Volume pricing available for fleet and multi-site deployments. Standard vinyl covers typically carry a 1-year UV rating. This cover carries a 2-year UV rating from the same patented copolymer used in the AR Fire Caddy, rated to 7 years in the Caddy configuration. The material difference is what extends service life, and it’s what makes this a NFPA compliant fire extinguisher protection solution rather than a seasonal replacement item.
Practical Safety & Operational Benefits
Standard covers are plastic bags that leave gaps, trap condensation, and crack after one season. Our patented copolymer design is longer and slimmer, encapsulating the entire extinguisher from top to bottom. The difference shows up at inspection time. Extinguishers in our covers pass. Extinguishers in standard covers corrode from the bottom up because water pools where the cover ends.
NFPA 10 Section 6.1.3.7 requires fire extinguishers to be protected from physical damage, including impact, vibration, and environmental exposure. Our fire extinguisher cover provides that protection while keeping equipment visible and accessible. Supports OSHA and NFPA compliance by maintaining extinguisher readiness and reducing the risk of damaged, obstructed, or unreadable equipment.
Put your business card in your clients’ hands every day. Our covers can display your company logo, contact information, and safety protocols. The printing is permanent and won’t rub off or fade. Whenever your clients walk past an extinguisher or use it, they know who to call for service and replacements.
Patented copolymer, not a standard plastic bag
2-year UV protection when 1 year is typical
Clear viewing window for inspections
Proven across 25,000+ extinguisher inspections
4 sizes fit all standard extinguishers
Works with any wall or vehicle bracket
AR Fire Equipment supports fleet deployments, facility outfitting, and multi-site safety programs.
Call Now